Mon-Fri: 9:00 - 18:00
Sat-Sun - weekend

Applique Skull 8,2in. x 11,8in for clothes

  • Brand: Selftex
  • Product Code: 01.004
  • Availability: In Stock

$5.00

INSTRUCTIONS FOR APPLYING THERMAL APPLICATIONS ON FABRIC


Our glitter compositions are intended for application to fabrics (materials) that can be heated to a temperature of 180 - 200 ° C: cotton, linen with lavsan, linen, fabrics made of polyester fibers. A prerequisite is the lack of hairiness on the fabric, since in this case it is impossible to secure the sequins (fabrics with fleece, velor, velvet, etc.)

DO NOT use on non-heat resistant fabrics (which iron at low temperatures), such as nylon, vinyl or leather, etc.

Do not bleach.

When transferring, it is recommended to use TERMOPRESS, but not necessarily. You can also use IRONING PRESS or IRON.

Application with THERMOPRESS:

Set the temperature on the press 155-165 ° C

Remove the white embossed backing from the design.

Manually apply the fabric onto the fabric with the adhesive side down on the selected spot.

Cover the applied thermal application with a sheet of paper (tracing paper).

Click on the attached application with a thermal press. The clamping time is 15 seconds, for a high-quality transfer of the application.

Allow the product to cool, and then slowly remove the cooled transparent film from the product (the spangles will remain glued to the fabric).

If, when removing the film, not all of the sparkles adhered to the fabric, return the transparent film to the previous fixation point and repeat processing for this area.

Application with IRON:

Prepare work surface for transfer. The surface must be flat and rigid in order to create a uniform pressing force during transport. Do not transfer to a soft surface, to ironing boards with foam covers, to soft felt types, etc.

Set the iron temperature control to the maximum “●●●” / “Cotton” position and wait until it is fully heated.

Remove the white embossed backing from the design.

Manually apply the fabric onto the fabric with the adhesive side down on the selected spot.

Cover the applied thermal application with a sheet of paper (tracing paper).

Press the heated iron on the application, do not move the iron during pressing, the fixing time is 15 seconds. If the size of the applied transfer is larger than the size that the iron presses, lift the iron and move it to the area without heating the sample and repeat the process. Zones should overlap with each other. Make sure that you have not missed a single application heating zone during application.

Allow the product to cool, and then slowly remove the cooled transparent film from the product (the spangles will remain glued to the fabric).

If, when removing the film, not all of the sparkles adhered to the fabric, return the transparent film to the previous fixation point and repeat the ironing for this area.

 


If you have any questions about the translation, feel free to ask us.

Our email address: sales@selftex.com

If you have an interesting design in mind, we can create an application transfer for it (MOQ 50pcs.).

 

Send us your images and we will provide you with computer projects and all the additional information that you may need.

Write a review

Note: HTML is not translated!
    Bad           Good